MATERIALS:

• Hook: Mustad 34011 OW, size 1 or 1/0
• Thread: white and red 3/0 Uni-thread or Kevlar
• Tail: silver flashabou, holographic, or similar
• Underbody: medium pearl crystal chenille (option: silver or white)
• Foam Overbody: white or yellow Evazote foam
• Collar Support: 18 Lb. hard mason leader tied with red thread
• Throat: red flashabou

TYING INSTRUCTIONS:

1. Attach 30-40 strands of silver flashabou at bend to form tail. Cut blunt, approx. 1/2 to 1/3 the shank length. Note: tail may also be bucktail, hackles, or combinations of each.
2. Attach medium crystal chenille at rear end of shank over tail wrap.
3. Wrap chenille forward, covering tail wraps. Don't crowd the eye!
4. Cut foam: 1/2" x 2 6/8". Cut a strip 1/8" on each side to be tapered from the point where if is attached at the rear end of the shank.
5. Attach foam to shank at chenille tie-off point.
6. Tie in small clump of red flashabou.
7. Clip thread and retie thread at rear end of shank/chenille.
8. Pull Foam back and tie off at rear end of shank/chenille. Secure wrap, finish and clip.
9. Tie in red thread. Pull foam forward and tie down in front of previous ties, just behind the eye. Make sure that both layers of foam are centered over hook shank. There should be approx. 1/4"-3/8" of foam extending over the eye. Tie down foam to hook.
10. Tie in a small loop of 18 lb. mono to support foam head so that it lays on the back of the head.
11. Option: fill underside with Softex or Goop, for durability. Add a thin film on back of bug. Shape head round or oval.

NOTES: "This fly is good for smallies on a topwater bite."